How to Hem Your Pants Without a Sewing Machine

How to Hem Your Pants Without a Sewing Machine

With so few length options in the women's fashion industry, hemming your pants is often necessary. Doing this alteration yourself is a simple way to get the perfect fit without having to visit a tailor. Whether you're working with a sewing machine or prefer a no-sew option, this guide will walk you through the process (with photos) so you can achieve a professional finish at home.

 

Have a sewing machine? Check out our article on how to hem pants with a sewing machine.

 

Hemming Pants Without a Sewing Machine

 

No sewing machine? No problem! You can still hem your pants using one of these no-sew methods. We will look at two methods: hemming tape and fabric glue. These are by far the easiest no-sew solutions to hemming your pants.

 

What You’ll Need:

 

Step 1: Measure

Measure your inseam length. We have a wonderful guide on how to measure your inseam length. You can measure another pair or measure yourself. This will help you get the perfect length each time and save time for future alterations. Plus, it's always good to know your measurements.

 

You can also adjust the length with the pants on by putting on your pants with the shoes you’ll usually wear them with. Fold the extra fabric inside the pant leg until they’re at your desired length. Pin the fold in place and measure from the original hem to your new fold, ensuring consistency on both legs.

 

Step 2: Seam Allowance

 Take your measurements and add a seam allowance to it. We recommend a 2" - 3" seam allowance, depending on the garment. One good way to determine your seam allowance is to measure the current seam and double it.

 

Step 3: Mark and Trim

 Measure from the crotch and down the leg to the length of your inseam + seam allowance. This is the bottom of your hem and your cut line. Mark this with a marker or pen. You might need to seam rip your existing hem to make more space.

 

Trim any excess fabric below the line that you marked.

 

Step 3: Fold and Press the Hem

Turn the pants inside out and fold the hem. To do this, you will need to fold the pants up by 1/2 of your seam allowance and press. Next, fold the pants again by another 1/2" of the seam allowance and press. This double fold gives you’re a professional look and keeps the fabric from unraveling. Pressing the hem is optional, but it does make sewing easier.

 

For example: You have a 2" seam allowance. You will fold up the bottom of the pant by 1" and press the seam. Then, you will fold the 1" hem again, so no unfinished fabric is exposed.

 

 

Step 4: Press and Seal

 

Method 1: Hemming Tape

Cut a strip of hemming tape that fits around the inside of the folded hem.

Place the hemming tape inside the fold, and press with a hot iron for a few seconds. The heat will melt the tape and bond the fabric.

 

Method 2: Fabric Glue

Turn your pants inside out and apply fabric glue along the inside of the fold. Press the hem down and use pins to hold it while the glue dries. Allow the glue to dry fully before wearing your pants.

 

You’re Done! Enjoy your perfectly tailored pants. Show us your work by tagging us @metreclothing.

 

We know how difficult it can be to find pants that are the right length.

 

At Metre, we understand how inconvenient shopping for pants can be. That’s why our mission is to offer pants that fit perfectly, without the need for alterations. We provide 8 different height options, ensuring you get a tailored fit straight out of the box.

With Metre, you no longer have to worry about hemming your pants — but for those older pairs in your closet, this guide should make the process simple and hassle-free.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.